FAQ: Interfacing

Connecting Models FUEL3100, & DIESEL3200

NMEA OUTPUT + from third party instrument, connect to YELLOW wire (NMEA IN) on NAVMAN instrument
NMEA Output - from third party instrument, connect to GND.
NMEA input + on third party instrument, connect to WHITE wire (NMEA out) on NAVMAN instrument.
NMEA input - from third party instrument, connect to GND

Connecting Models FISH 4150, FISH 4200, FISH 4380. DEPTH 3100, WIND 3100, SPEED 3100 & MULTI 3100

These models can only output NMEA.

NMEA input + on third party instrument, connect to WHITE wire (NMEA out) on NAVMAN instrument.

NMEA input - from third party instrument, connect to GND

Connecting TRACKER 5100/i, TRACKER 5500/i, TRACKER 5600 & FISH 4500

NMEA OUTPUT + from third party instrument, connect to BLUE wire (NMEA IN) on NAVMAN instrument NMEA Output - from third party instrument, connect to GND. NMEA input + on third party instrument, connect to WHITE wire (NMEA out) on NAVMAN instrument. NMEA input - from third party instrument, connect to GND.

Connecting VHF 7100, 7200 to a GPS

NMEA OUTPUT + from third party instrument, connect to yellow wire (NMEA IN) on NAVMAN VHF7100/7200 NMEA Output - from third party instrument, connect to Green (NMEA -) on Navman VHF7100/7200

How do I connect my instrument to my computer RS232 port?

For Models FISH 4150, FISH 4200, FISH 4380, FISH 4500, TRACKER 5100/i, TRACKER 5500/i, TRACKER 5600, TRACKFISH 6500, TRACKFISH 6600. Connect pin5 (GND) on the DB9 connector to the power GND , connect pin2 on the DB9 connector (RX) to the white wire (NMEA out) on the main power connector.